Dlynd Four Person Three Air Beam Tent with Hand Pump Sage Graphite

Overview

One four-person tunnel-profile tent supported by exactly three inflatable TPU arch beams sewn into the sage body. A graphite roof fly clips over the three arches, while one front door, one rear door, and four covered side windows serve the enclosed interior.

Specifications

• Sleeping capacity: 4 people
• Pitched dimensions: 360 cm L x 250 cm W x 190 cm H
• Structural type: three-arch inflatable air-beam tent
• Body material: sage 150D polyester
• Floor material: sewn-in graphite 210D polyester oxford
• Roof fly: exactly 1 removable graphite polyester roof fly
• Air beams: exactly 3 separate TPU arch tubes in zippered fabric sleeves
• Valves: exactly 1 capped inflation valve per beam, 3 total
• Doors: exactly 2, one full-height front door and one smaller rear door
• Windows: exactly 4 covered rectangular mesh windows, 2 per long side
• Low vents: exactly 2 covered mesh vents, one at each end
• Pump: exactly 1 double-action hand pump with 1 detachable hose
• Stakes: exactly 14 steel stakes
• Guylines: exactly 8 reflective lines with 8 tensioners
• Repair pieces: exactly 3 TPU patches and 1 plastic valve tool
• Product Net Weight: approximately 10.2 kg including supplied pitch components

Features

• Three inflatable arches replace rigid roof or wall poles.
• Each beam has its own capped valve and zippered sleeve.
• The removable fly covers the roof without forming a separate vestibule.
• No electric pump, rigid poles, footprint, furniture, sleeping equipment, or pressure gauge is included.

Package Includes

• 1 sage four-person tent body with floor and 3 sleeved air beams
• 1 graphite removable roof fly
• 1 double-action hand pump
• 1 detachable pump hose
• 14 steel stakes
• 8 reflective guylines with tensioners
• 3 TPU repair patches
• 1 plastic valve tool
• 1 wheeled carry bag
• 1 setup and care card

Use and Care

Pitch on a permitted level campsite with room for the complete body, both doors, and all lines. Read the supplied inflation sequence, attach the hand pump to one capped valve at a time, and stop at the instruction value; do not use an unregulated compressor or exceed the stated setup pressure. Close each valve cap, secure the fly, stakes, and lines, and recheck beam shape during use. Keep away from flame, cooking, heaters, sharp ground debris, unstable trees, flood routes, and severe weather. Deflate only after the shelter is empty and dry. Brush and spot clean gently, dry every fabric and component, release all three beams, and roll without sharply folding valves or tubes.